Windows Me IP Address Settings
Right mouse click on My Network Places and select Properties
Click on the Identification tab to change the Computer name and add a Workgroup. The computer name should be a unique name given by you to the computer (it's best to change it from the default settings). The workgroup is also a name given by you: it should be the same for all of your computers.
Figure B.6: Changing the Computer name in Windows Me
Click on the Configuration tab.
Figure B.7: The main Network window with the Configuration tab selected. Select the TCP/IP and click on Properties.
Select the TCP/IP and click on Properties.
Figure B.8: Specifing an IP address and Subnet Mask.
If you want the machine to obtain IP settings automatically from WinProxy, you're done.
If you want to make your own IP assignments, click on the Specify an IP address button. Enter a non-routable IP addresses as in this example (some other examples 90.X.X.X, 172.16-31.X.X, or 192.168.X.X) There should be NO Gateway or DNS installed on this network card. Click OK through all open menus, (DO NOT click cancel, if you do all your new settings will be lost)
Your computer will prompt you to restart for settings to take effect.
